ONTARIO - IRRIGATION

This rainwater harvesting system is designed to be used for irrigation around the yard. Based on the initial analysis this system can harvest approximately 80,000 litres annually using a 4540 liter (1000 imp gal) rainwater tank. The flat roof design of this home required the use of both interior drains and exterior drains allowing for full frontal glass exterior across the front of the home.

As this is a non-potable system all hose bibs are identified with visible signage warning of Non-Potable Water. The use on non-potable water must be done with much care and attention to ensure public safety.

Cleanflo Water Technologies was contacted by clients builder to design and install a rainwater harvesting system on a residential property in the Richmond Hill area in Toronto, Ontario, Canada.. The homeowners wanted to collect rainwater for water conservation in their home, and also to meet the city’s requirements for onsite stormwater management.

The system creates water that is clean, odor free, safe to use around your yard, children and pets. Cleanflo provided a fully installed rainwater harvesting system from roof to tap, a true turn key solution. Which was Only used for irrigation outdoors with No interior plumbing. We provided our client with a Single Point of contact for the complete supply and install process. Our installation starts with professional designs done in house, we handled all permits and engineering. Provide post installation inspections via video to ensure our engineering department is satisfied with every installation our authorised installers complete. This ensures the highest level of quality control and assurance.